I would say not as the small ones will leave enough room. Also, I wouldnt advise to get gripshift ones if you dont have a gripshift as these will be rather short.

answered 1 year, 10 months ago

Russ

- London

answer 3

That would be ok.

answered 2 years, 5 months ago

guru

- hampshire.uk

Question

can you fit a mirror that goes into bar end hole?

I have a mirror that is mounted in the hole where bar end plugs usually go. Is this grip closed on the bar end, or there's an opening into bar cavity where I could install the mirror?

asked 1 year, 5 months ago

milan60

- Sydney

on GC2 Handlebar Grips

3 answers

Answers

answer 1

The GC2 are open on the side with a normal plastic and removable plug. You can fit any mirror that is mounted in handlebar's end.

Country: Greece

answered 11 months ago

skritikos

- Athens

answer 2

Removable cap

answered 1 year, 5 months ago

LondonComuter

- London

answer 3

The bar end is open so you can fit the mirror with these grips.

answered 1 year, 5 months ago

WiggleDean

- Hampshire

Question

I've only 1 gripshift gear lever. Do I need to buy a gripshift and a standard set? Or does the gripshift set come with 1 long & 1 short grip?

I have a Giant Escape R8, with Shimano Nexus gripshift on the right-hand side. Do I need to buy a gripshift and a standard set? Or does the gripshift set come with one long and one short grip?

asked 2 years, 8 months ago

Martin76

- London

on GC2 Handlebar Grips

2 answers

Answers

answer 1

Gripshift set. You get one long, one standard. I have GC2s on my Alfine 8 and Rohloff bikes.

answered 1 year, 4 months ago

EarlGrey

answer 2

Both grips are the same length so you would need to buy two sets to get the setup you require

answered 2 years, 7 months ago

guru

- hampshire.uk

Question

I HAVE A FOCUS BLACKFOREST WHAT SIZE WILL I NEED

asked 2 years, 7 months ago

PROBBY

- MACCELSFIELD

on GC2 Handlebar Grips

2 answers

Answers

answer 1

All bars are the same diameter , you just need the correct size grips for hand size. small/ large ( outer diamater )
See the ergon web page.

Country: Australia

answered 1 year, 7 months ago

gmack

- Adelaide

answer 2

The sizes of the grips are based on hand size. Try to go by your gloves size. Small/medium gloves should go for the smaller size. Large/XLarge should go for the larger size

answered 2 years, 7 months ago

guru

- hampshire.uk

Question

i have a specalized sirrus 2010 model will these fit and what size would i need

asked 1 year, 8 months ago

vijay

on GC2 Handlebar Grips

2 answers

Answers

answer 1

I put them on my specialized sirrus. They work well. Unfortunately, I don't know what size I own.

answered 1 year, 8 months ago

Suggy

- Sherwood Park, AB, Canada

answer 2

Yes these grips will fit the bars on your bike. The grip sizing is about hand size. If you use Small or medium gloves get the small size. if you use large or xLarge gloves get the large size.

answered 1 year, 8 months ago

WiggleDean

- Hampshire

Question

shorter handlebars

I have a women's specific hybrid bike with Gripshift I want to fit these grips to but having measured the space on the bar am unsure if they will fit.

The diameter seems to be fine but I only have 86mm of bar space after the Gripshift.

Would the HS100 plug in work to extend the space I need to fit these grips?

Is there any way I'm going to get to fit grips like these?

thanks

Country: United Kingdom

Products related to my question

GC2 Handlebar Grips

(69)

asked 1 year, 8 months ago

Terz

- Glasgow

on GC2 Handlebar Grips

2 answers

Answers

answer 1

There is a special Gripshift version made for your Gripshifts! Check Ergon's website and Wiggle.

Country: Greece

answered 11 months ago

skritikos

- Athens

answer 2

You will need at least 95mm of bar space in order to fit the grips.

answered 1 year, 8 months ago

WiggleDean

- Hampshire

Question

I have a Specialised Sirrus bike with straight handlebars. Would the Ergon GC2 grips be suitable?

asked 1 year, 3 months ago

Anonymous

on GC2 Handlebar Grips

2 answers

Answers

answer 1

I can't see why not. In fact, they would be ideal.

answered 11 months ago

RichardEdwards

- Bristol

answer 2

These are a universal fit grip so will fit your bars.

Number One Contributor

answered 1 year, 3 months ago

wigglerob

Question

Which Ergon handle bar grip fits a C3 Cannondale handle?

Bar is approx 23mm thick.

asked 2 years, 10 months ago

trebron87

- Malta

on GC2 Handlebar Grips

1 answer

Answers

answer 1

Sorry, I am unable to guarantee compatibility for an item we do not stock.

answered 2 years, 10 months ago

guru

- hampshire.uk

Question

Will these fit on my Hoy Hoy Rats 2008?

asked 2 years, 9 months ago

swj1

on GC2 Handlebar Grips

1 answer

Answers

answer 1

Yes.

answered 2 years, 9 months ago

guru

- hampshire.uk

Question

Is it possible to purchase a replacement set of bar ends for my Ergon GC2's.

If in the future I wish to go long touring rides, can I replace the GC2 bar ends with a longer set of GC3 bar ends without having to buy a full set of GC3 grips?

Country: United Kingdom

asked 1 year, 9 months ago

MoMoMuncher

- Stirling

on GC2 Handlebar Grips

1 answer

Answers

answer 1

Unfortunately not, these are supplied as full sets only.

answered 1 year, 9 months ago

WiggleDean

- Hampshire

1 2 next>>

Looking for Answers about this Product?

Customer Questions & Answers for Ergon GC2 Handlebar Grips

Questions & Answers for Ergon GC2 Handlebar Grips

Customer Questions & Answers for
Ergon GC2 Handlebar Grips