Peaty is the new signature grip from Steve Peat. The Peaty grip has a small diameter for a more direct feel. It features a soft compound chocolate block pattern for increased grip and it has "Peaty" inscribed on it, for increased cool. The Peaty grip comes in two colours to match your bike. Graphite grey with red anodized Lock-On collars or, for the full patriotic effect, bright white with contrasting red and blue collars.

Customer Questions & Answers:

4 Questions

24 Answers

Ask a New Question

Overall Rating:

4.6

out of

Read All 84 Reviews84

Questions & Answers for Lizard Skins Peaty Lock On Handlebar Grips

Question

End rings

Are the end rings hollo to allow bar end to fit on the handle bar.

Images for this Question

(click to enlarge)

asked 2 years, 5 months ago

rockerbilly

on Peaty Lock On Handlebar Grips

9 answers

Answers

answer 1

Yes, they are hollow. They are basically rings that lock onto the bar with a grub screw. The bar ends I used slipped over my handle bar, so I had to move my grips in around 20mm to allow this.
These grips will work with both bar ends that slide over the bar, or go in the actual handlebar.

answered 8 months ago

OzzieBiker

answer 2

Yes they are bar ends fit no problems.

answered 1 year, 3 months ago

banshee

answer 3

Yep, the lock-rings are the same diameter as the grip. Plastic handlebar plugs are also included.

Country: Australia

answered 1 year, 3 months ago

DirtWorker

- Sydney

answer 4

Yes they are hollow, they come with plastic bungs for the end of your bars.

answered 1 year, 3 months ago

manwiththeredface

answer 5

Yes they are, so bar ends are no problem.

Top 250 Contributor

answered 1 year, 6 months ago

PeaksRider

- Wilmslow, South Manchester, Uk

answer 6

Yes, the securing rings are hollow (same rings on each end of grip), so you can fit bar ends.

Country: United Kingdom

answered 1 year, 7 months ago

Norgeblue

answer 7

Yes, that's possible.

answered 1 year, 10 months ago

armie

answer 8

yes

answered 1 year, 11 months ago

5Spot

answer 9

Yes but they do come with bar end plugs.

answered 2 years, 5 months ago

guru

- hampshire.uk

Question

Can you please tell me if you are able to have the red locks at the ends and still have the "Peaty" sign showing on both grips.

From the pictures it looks like you have the right side with the red lock at the end and the left side with the blue lock at the end.

Products related to my question

Peaty Lock On Handlebar Grips

(84)

asked 1 year, 11 months ago

Anonymous

on Peaty Lock On Handlebar Grips

7 answers

Answers

answer 1

Makes no difference, they are identical except for the anodising (colour)
So in essence, yes, whatever colour you want on the end, you can put.

answered 8 months ago

OzzieBiker

answer 2

you can see the peaty writing on both ends facing the same way they are not level but the gap is not that much

answered 1 year, 1 month ago

vanish06

answer 3

yes you can have the red at the ends... you attach the locks to the grips yourself.

answered 1 year, 3 months ago

ALLSTAR

- Cairns, Queensland

answer 4

YEAH NO WORRIES

answered 1 year, 3 months ago

MOTOFOX

- WIGAN

answer 5

The ends come loose so you can fit them however you want, My only advise would be to work it all out first because once you've clicked the lock sections on the ends of the grips I'm not sure how easy they would be to get off again.

answered 1 year, 3 months ago

manwiththeredface

answer 6

Each grip has a red and lblue lock. You choose which way you want them. "Peaty "shows either way

answered 1 year, 7 months ago

reddy510

answer 7

Hi, I bought some of these and your answer is yes.

This is because you fit the clamps to the grips so you can choose which end each colour goes on. The Peaty is written on top and below the grip. So you can swap them once the clamps are fitted.

A tip to fitting the clamp is to line-up the insert on the clamp to the tabs on the grip and place the clamp on a bench with the grip on top. You need to push very hard down onto the grip towards the bench to get the clamp to clip over the grip tabs.

Also wash your hands before fitting them as the white quickly picks up dirt.

Enjoy

answered 1 year, 11 months ago

5Spot

Question

Red White and Blue Peaty grips - Is it the Blue or Red lock which goes at the end of the bar?

asked 2 years, 1 month ago

Vinny

- Manchester

on Peaty Lock On Handlebar Grips

5 answers

Answers

answer 1

Makes no difference, they are identical except for the anodising (colour)

answered 8 months ago

OzzieBiker

answer 2

does not matter which way you put them on - I have both red on one side and both blue on the other.

answered 8 months ago

jackel

answer 3

Its totally up to you... whatever looks best on your bike (you attach the locks to the grips yourself)

Country: Australia

answered 1 year, 3 months ago

ALLSTAR

- Cairns, Queensland

answer 4

you choose, as you have to fit the rings yourself.

answered 1 year, 11 months ago

5Spot

answer 5

Either.

answered 2 years, 1 month ago

guru

- hampshire.uk

Question

What diameter bars will these fit?

My old Nishiki has bars which are 21.5mm, i'm uncertain if this is still standard.

Country: United Kingdom

Products related to my question

Peaty Lock On Handlebar Grips

(84)

asked 2 years ago

OggyAv8er

- Knaresborough

on Peaty Lock On Handlebar Grips

3 answers

Answers

answer 1

ANY BARS

answered 1 year, 3 months ago

MOTOFOX

- WIGAN

answer 2

YEAH NO WORRIES STILL SAME SIZE.

answered 1 year, 3 months ago

MOTOFOX

- WIGAN

answer 3

The standard is 22.2mm.

answered 2 years ago

guru

- hampshire.uk

1 of 1

Looking for Answers about this Product?

Customer Questions & Answers for Lizard Skins Peaty Lock On Handlebar Grips

Questions & Answers for Lizard Skins Peaty Lock On Handlebar Grips

Customer Questions & Answers for
Lizard Skins Peaty Lock On Handlebar Grips