Search Wiggle

Looking for Answers about this Product?

Accessories(Q:5914 A:15202)
Bikes(Q:952 A:1184)
Clothing(Q:3980 A:10002)
Components(Q:6155 A:11882)
Components General Q&A(Q:6155 A:11882)
Brakes(Q:1034 A:1622)
Frames(Q:665 A:891)
Gears & Drivetrain(Q:1481 A:2629)
Mudguards(Q:330 A:741)
Pedals(Q:153 A:437)
Saddles & Seat Posts(Q:253 A:553)
Steering(Q:882 A:1700)
Steering General Q&A(Q:882 A:1700)
Aero Handlebars(Q:226 A:318)
Bar Ends(Q:49 A:147)
Bar Grips(Q:106 A:253)
Bar Tape(Q:57 A:277)
Bike Mirrors(Q:22 A:129)
Headsets(Q:219 A:278)
MTB Handlebars(Q:42 A:58)
Road Handlebars(Q:161 A:240)
Tyres(Q:1096 A:2906)
Wheel Components(Q:260 A:397)
Headwear(Q:1 A:1)
Kids - Run(Q:3 A:2)
Locks(Q:111 A:317)
MTB Chainsets(Q:120 A:155)
MTB Clip-In Pedals(Q:157 A:679)
MTB Front Derailleurs(Q:62 A:100)
MTB Hubs(Q:43 A:58)
MTB Inner Tubes(Q:57 A:176)
MTB Rear Derailleurs(Q:87 A:118)
MTB Wheels(Q:289 A:366)
Men's Swimwear(Q:36 A:95)
Mountain Bike Forks(Q:137 A:154)
Nutrition(Q:184 A:849)
Oversize Stems(Q:143 A:242)
Road Chainsets(Q:282 A:338)
Road Clip-In Pedals(Q:273 A:831)
Road Forks(Q:124 A:136)
Road Front Derailleurs(Q:100 A:159)
Road Hubs(Q:105 A:132)
Road Inner Tubes(Q:249 A:577)
Road Race Wheels(Q:941 A:1339)
Road Rear Derailleurs(Q:138 A:227)
Shoes(Q:1792 A:3480)
Shoes - Cycle(Q:2 A:2)
Standard Stems(Q:76 A:103)
Stems - DH(Q:3 A:4)
Women's Swimwear(Q:97 A:234)
Most Recent Questions
Recent Question:
Is this handlebar pre-drilled for internal cabling?
Recent Question:
what is the diameter of the end of the handlebar?
Recent Question:
Any Installation Instructions?
Recent Question:
are these bars compatible with the : Token TK9741-2 Aero Clip On Bars and Pads ..... ie these are aero bars so not circular in the middle !
Questions with Most Recent Answers
Question:
standard clamp size compact bar
Question:
Drop and Reach
Question:
What stem clamp size is this?
Question:
Can I fit clip on aero bars to the 3T ErgoNova Pro Alloy Road Handlebars?
Question:
Where is the c-c measurement made?

Customer Questions & Answers for
Charge Slice Bullhorn Handlebar 2011

Bullhorn style aluminium track handlebar
Customer Questions & Answers:
13 Questions
 | 
15 Answers
Overall Rating:
4.533 out of 5
4.5
out of
5
Product Details

Questions & Answers for Charge Slice Bullhorn Handlebar 2011

Question
If this bar doesn't fit a 2010 mixer, any suggestions?
Info on bar diameters is not easy to find - seems like something you're just meant to know.

The mixer has a modern 'Mountain' stem of 25.4mm and, I guess, an upright brake clamp of 22.2mm.

What bullhorns would fit?
Country: United Kingdom
 
Products related to my question
 
asked 1 year, 7 months ago
by
Decoydeluxe
on Slice Bullhorn Handlebar 2011
2 answers
Answers
answer 1
As long as you also fit a mountain bike stem then yes it will. You need a combination of MTB stem and road levers.
Best Answer
answered 1 year ago
by
SimonAH
 - Cwmbran
answer 2
The Slice bar will fit the Mixer 2010 so you shouldn't have any issues.
Staff Answer
answered 1 year, 7 months ago
by
WiggleDean
 - Hampshire
Question
Will these take bar end shifters?
Is there enough of a straight section on the ends for the expander bolts? What is the inside diameter of the bars?
 
Products related to my question
 
asked 1 year, 7 months ago
by
okhan
on Slice Bullhorn Handlebar 2011
2 answers
Answers
answer 1
Yes it will, I've got Cane Creek bar end levers fitted to mine.
answered 1 year ago
by
SimonAH
 - Cwmbran
answer 2
Yes you can fit bar end shifters to these bars. Inside diameter is approx. 17mm.
Staff Answer
answered 1 year, 7 months ago
by
WiggleDean
 - Hampshire
Question
Hi, what is the external diameter of the non-clamp (the 25.4) section of these bars? do they follow the MTB convention 22.2mm, or road bike 23.8mm? ty
asked 2 years, 11 months ago
by
VeloChild
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
These bars require an mtb stem but will only accept road brake levers
Staff Answer
answered 2 years, 5 months ago
by
BigSi
Question
Adding SRAM TT Brake
Can I mount SRAM TT brakes to that handlebar -> means is there a hole to get the cable out again?
asked 2 years, 9 months ago
by
michaelberlin
 - Berlin
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
Probably not.
Staff Answer
answered 2 years, 9 months ago
by
guru
 - hampshire.uk
Question
Will this fit into a 31.8mm stock schwinn madison 09 clamp?
asked 2 years, 7 months ago
by
shermz
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
No, for MTB stem only.
Staff Answer
answered 2 years, 6 months ago
by
guru
 - hampshire.uk
Question
Can you recomend some brake levers for these bars?
Can you recommend a brake lever (or two) you have in your store that would suit these bars. Ideally I only need a front (right) lever, but if I need to buy a pair then so be it. Just looking for something simple but effective for road bike calliper front brake.

Thanks
Phil
Country: Australia
asked 2 years, 3 months ago
by
phirst
 - Perth
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
Researched this myself in the end

Need to be 24-25mm compatible

- see example products below...
Country: Australia
 
Products from my answer
 
Cross Brake Levers
4.8 out of 5(8)
 
 
 
 
 
 
answered 2 years, 3 months ago
by
phirst
 - Perth
Question
What exactly is meant by "mountain bike stem"?
I mean, mountain bike stems can often be interchanged with road stems (the difference being mostly to do with strength etc.). Is it the 25.4mm clamp diameter?
Country: Australia
asked 2 years, 2 months ago
by
Anonymous
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
Mountainbikes use 25.4mm clamping areas and 31.8mm as oversized. Road stems are 26.0mm or 31.8mm oversized. So the bar would need a MTB style stem to fit.
Staff Answer
answered 2 years, 1 month ago
by
WiggleDean
 - Hampshire
Question
I own a Charge Mixer 2010 with the hydraulic discs. really fancy a set of these bars! do you know if the mixer brake levers will fit on these bars?
asked 2 years ago
by
TomBCR
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
Unfortunately your brake levers will not fit the bars. The stem clamping area is 25.4mm but the lever/grip area is 24mm for road brake levers.
Staff Answer
answered 2 years ago
by
WiggleDean
 - Hampshire
Question
Will you be getting the white ones in?
asked 1 year, 9 months ago
by
nichojnr
 - York
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
We have no plans to stock the white version of the bars at this time but we may do so in the future so please check back with me
Staff Answer
answered 1 year, 9 months ago
by
WiggleDean
 - Hampshire
Question
Will these fit on a Specialized langster steel?
asked 1 year, 9 months ago
by
jayj
on Slice Bullhorn Handlebar 2011
1 answer
Answers
answer 1
Yes these will fit on the langster steel.
Staff Answer
answered 1 year, 9 months ago
by
WiggleDean
 - Hampshire
1 2 next>>