Search Wiggle

Looking for Answers about this Product?

Accessories(Q:5907 A:15151)
Accessories General Q&A(Q:5907 A:15151)
Audio Equipment(Q:11 A:18)
Bags(Q:947 A:2287)
Bike Locks(Q:10 A:22)
Books, Maps & Media(Q:27 A:48)
Bottles & Hydration(Q:209 A:703)
Camping & Touring(Q:747 A:1209)
Computers, GPS & Watches(Q:1546 A:3743)
Events(Q:24 A:25)
Gifts(Q:9 A:9)
Glasses & Goggles(Q:75 A:301)
Helmets(Q:253 A:446)
Lights & Reflectives(Q:614 A:2384)
Pumps & Puncture Repair(Q:329 A:1104)
Swim Training(Q:76 A:232)
Tools & Maintenance(Q:507 A:1486)
Bikes(Q:951 A:1167)
Clothing(Q:3977 A:9956)
Components(Q:6139 A:11820)
Headwear(Q:1 A:1)
Kids - Run(Q:3 A:1)
Locks(Q:111 A:316)
MTB Chainsets(Q:120 A:155)
MTB Clip-In Pedals(Q:157 A:676)
MTB Hubs(Q:43 A:58)
MTB Inner Tubes(Q:57 A:176)
MTB Rear Derailleurs(Q:86 A:116)
MTB Wheels(Q:289 A:363)
Men's Swimwear(Q:35 A:95)
Mountain Bike Forks(Q:137 A:149)
Nutrition(Q:185 A:848)
Oversize Stems(Q:144 A:241)
Road Chainsets(Q:282 A:337)
Road Clip-In Pedals(Q:273 A:829)
Road Forks(Q:124 A:135)
Road Front Derailleurs(Q:100 A:159)
Road Hubs(Q:105 A:129)
Road Inner Tubes(Q:249 A:576)
Road Race Wheels(Q:937 A:1328)
Road Rear Derailleurs(Q:138 A:227)
Shoes(Q:1789 A:3445)
Shoes - Cycle(Q:2 A:2)
Standard Stems(Q:76 A:100)
Stems - DH(Q:3 A:4)
Women's Swimwear(Q:97 A:232)
Most Recent Questions
Recent Question:
Could you please let me know the the whole weight of all the items as I need to calcuate the shippement cost.? Thanks
Recent Question:
ON CYCLE OPS TURBO TRAINER, WHEN IN FREE WHEEL DOES THE WHEEL CONTINUE TO FREE WHEEL FOR A WHILE OR COME TO A STOP PRETTY QUICKLY?
Recent Question:
Is this product compatible with my Ghost AMR 7500
Recent Question:
is it adjustable to tyre size, can it fit 26"
Recent Question:
Are there any turbo trainers I could use that do not need quick release wheels?
Questions with Most Recent Answers
Question:
is it supplied with a Quick release skewer
Question:
How do I actually change the resistance on the Cycleops Mag Classic?
Question:
General Question on Turbo Trainers - Bike needed?
Question:
Is this product compatible with my Ghost AMR 7500
Question:
What is the go with resistance when riding rollers?

Customer Questions & Answers for
CycleOps Classic Fluid 2 Turbo Trainer with DVD

The CycleOps Fluid² "Best in Class" trainer! With its Power Band Technology, this trainer cannot be beat!
Customer Questions & Answers:
16 Questions
 | 
28 Answers
Overall Rating:
4.403 out of 5
4.4
out of
5
Product Details

Questions & Answers for CycleOps Classic Fluid 2 Turbo Trainer with DVD

Question
Is the CycleOps Classic Fluid 2 Turbo Trainer compatible with a mountain bike (26 inch wheel)
asked 1 year, 5 months ago
by
Meist
on Classic Fluid 2 Turbo Trainer with DVD
3 answers
Answers
answer 1
yer i use 26inch
answered 7 months ago
by
Divemastersteve
answer 2
According to the manual "yes", but I've never tried with mine. I would suggest it would be quite noisy with knobbly MTB tyres (it's very quiet with a normal road bike tyre). However, I know Continental sell a MTB specific 26" home trainer tyre which would be well worth getting - I have the road bike version and it's certainly quieter than a normal tyre and far more hard wearing.
Top 250 Contributor
Top 250 Contributor
answered 1 year, 5 months ago
by
Musicman241068
 - Wilts
answer 3
Yes you can use 26" wheels on this trainer.
Staff Answer
answered 1 year, 5 months ago
by
WiggleDean
 - Hampshire
Question
Is a riser block supplied with thsi trainer?
asked 11 months ago
by
AvantiQuantum2
 - Western Australia
on Classic Fluid 2 Turbo Trainer with DVD
3 answers
Answers
answer 1
The one i bought did not have a riser block, I just used a couple of old reference books. Why pay for a piece of plastic when you can improvise?
answered 4 months ago
by
rwhg63
 - Andover, UK
answer 2
no. I recommend you purchase the separate CycleOps riser block. You do get a wheel skewer so you can be sure the skewer sits nicely in the trainer mounts.
answered 10 months ago
by
JaffaM
 - Sydney
answer 3
No it does not come with a riser block.
answered 11 months ago
by
PT2009
Question
Is it suitable with my bike(700*23C TIRES ) and when could I have it from the time I order it? Thank you in advance
asked 2 years, 4 months ago
by
Thersitis
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Yes suitable for that tyre size.
Country: United Kingdom
answered 8 months ago
by
BDH1
 - Hertford
answer 2
Yes, that tyre size is fine, for latest availability please check the grey/orange add to basket option, we update this as we get info from the suppliers.
Staff Answer
answered 2 years, 4 months ago
by
BigSi
Question
Shipping to Australia?
Are any of the turbo trainers from any brand at all able to be shipped to Australia?
asked 1 year, 11 months ago
by
Aussie109
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Wiggle shipped my "CycleOps Classic Fluid 2 Turbo Trainer with DVD" to Australia.

Shipping was free when I bought it.
answered 8 months ago
by
staychain
answer 2
We are now shipping trainers to Australia, remember to set your destination country to Australia to show all available trainers.
Staff Answer
answered 1 year, 11 months ago
by
WiggleDean
 - Hampshire
Question
Can the Turbo Trainer be used with a bike without Quick realease facility ?
asked 1 year, 10 months ago
by
StokieJohn
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Most turbo trainers should come with thier quick release axle that would replace your current non quick release axle. It takes only a few seconds to swap them around
answered 1 year, 7 months ago
by
WishWash
 - London
answer 2
You can use a nutted rear wheel to fit to the bike to the trainer.
Staff Answer
answered 1 year, 9 months ago
by
WiggleDean
 - Hampshire
Question
Classic Fluid 2 Turbo Trainer
I have had this trainer for a couple of years now and it is a good trainer however I am getting a very frustrating squeaking/creaking noise about 20mins into the session. This appears to be coming from where the skewer nut attaches to the trainer socket. I suspect it is something to do with the friction and heat build up and the rub is causing the noise. I've tried tightening up the skewer and even putting tape around the nut which stopped the noise until the friction burned the tape away. It isnt the bike as I don't have this problem on the road so it must be something to do with how the bike is connected to the trainer. Its getting so annoying I'm considering changing for another trainer. Any ideas?
 
Products related to my question
 
asked 1 year, 7 months ago
by
Price1373
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Same happened to me - Wish I had seen your question earlier. Seems there is an inherant fault inside the mechanism. Get it back to the store and your money back
Top 1000 Contributor
Top 1000 Contributor
answered 1 year ago
by
EEF5452
 - Yorkshire
answer 2
If you aren't using the skewer supplied with the trainer I would recommend doing so as this is a proven design for working with the trainer without noise. If you are using the supplied skewer you should check to make sure that the frame is straight as it could be that the trainer is not gripping the bike evenly on both sides, causing a wobble. If the trainer is gripping securely and the bike can't move you shouldn't have any issues with friction.
Staff Answer
answered 1 year, 7 months ago
by
WiggleDean
 - Hampshire
Question
Is there a Weight limit for CycleOps Fluid 2?
Hi, Is there a user weight limit on the Fluid 2? I am 6 foot 3 and 105 Kg. I realise I won't be able to leap of the saddle and power myself through the garage door but for steady seated training will it be ok?
asked 1 year, 7 months ago
by
Andywoo
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
I'm a similar weight and the unit copes fine - agreed I am nervous about getting out of the saddle and giving it loads, but for seated training at differing intensities and cadences it is solid as a rock.
answered 1 year, 4 months ago
by
CharlieJ1973
 - London
answer 2
This trainer will be fit for your purpose.
Number One Contributor
Number One Contributor
answered 1 year, 7 months ago
by
wigglerob
Question
Spare Parts
Hello,

I have a cycleops fluid 2 turbo trainer, which ghas worked really well. The over centre yellow lever at the rear has broken (my own fault) can I order a replacement from yourselves? If not where?

Many thanks,
asked 1 year, 7 months ago
by
Dan4tri
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
look under trainers i just got one myself from Wiggle.
answered 7 months ago
by
Divemastersteve
answer 2
Unfortunately we do not stock these as spare parts. If you purchased the trainer from us you can contact our sales team who may be able to order a replacement for you. Sales@wiggle.co.uk
Staff Answer
answered 1 year, 6 months ago
by
WiggleDean
 - Hampshire
Question
can the CycleOps Classic Fluid 2 Turbo Trainer be used with my cyclocross bike which has 700 x 30c tyres
asked 1 year, 6 months ago
by
stuwright
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Have done this with np problems
Top 100 Contributor
Top 100 Contributor
answered 1 year, 6 months ago
by
Bean
answer 2
Yes you can use this trainer with Cyclocross bikes. You may suffer some vibration if your tyres do not have a smooth central tread though so you may need to fit slick tyres.
Staff Answer
answered 1 year, 6 months ago
by
WiggleDean
 - Hampshire
Question
Does this work with a GIANT Cross City 2 Commuter Bike?
Country: Australia
asked 1 year, 1 month ago
by
MellyKerr
on Classic Fluid 2 Turbo Trainer with DVD
2 answers
Answers
answer 1
Should work with any bike! Although mountain bike tyres make a lot of noise - the smoother the tyre type the better.
Top 250 Contributor
Top 250 Contributor
answered 1 year, 1 month ago
by
DOTY
 - Northwest England
answer 2
Yes you should be fine to use this trainer with the Cross City 2 commuter bike.
Country: United Kingdom
Staff Answer
answered 1 year, 1 month ago
by
WiggleDean
 - Hampshire
1 2 next>>