You should be fine doing this, you will need to have your gears checked afterwards to make sure the shifting is till accurate. The change to and from the 22t ring won't be the smoothest because of the large size gap but should be fine otherwise.

answered 1 year, 8 months ago

WiggleDean

- Hampshire

Question

Compatibility with race-face Evolve XC crank-spider

Previously I have had M580 LX rings that fit fine except that they had internal lugs inboard of the bolt-holes that were about 2mm too long. I don't want to have to go thru that grinding process again!! Bike is an Aus spec Giant Reign 2008. Thanks in advance.

asked 2 years, 10 months ago

Romper

- Sydney

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

We would always suggest sticking to the same brand to avoid compatability issues, such as the one you mention. We do a large range of Race Face rings which can be found here: http://www.wiggle.co.uk/mc/cycle/7/Race_Face/Chainrings/

answered 2 years, 10 months ago

BigSi

Question

Is this compatible with Shimano Hollowtech 2 cranks?

Looking for a cheap, durable, middle ring as a short term stop gap for a bike with M580(?) LX chainset. Would this do the job?

asked 2 years, 8 months ago

hopkinsgm

- Wiltshire

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

Yes compatible.

answered 2 years, 8 months ago

guru

- hampshire.uk

Question

Is the deore 32T middle ring compatible with Shimano HG70 chain

Is the HG70 chain also compatible with the Shimano LX M570 middle rign?

Country: France

asked 2 years, 6 months ago

Kencon

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

Yes it is.

answered 2 years, 6 months ago

guru

- hampshire.uk

Question

Can I replace a Trushift middle ring with the Shimano?

The Trushift is a 32 V6 2000

asked 2 years, 1 month ago

copthornebiker

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

The chainrings match in specifications, they are both 104BCD, 4 arm, 32t chainrings. You will be able to fit the chainring but mixing types of chainring can still cause problems if the ramps and pins do not match and line up correctly. You may experience noise or even chain jumps.

answered 2 years, 1 month ago

WiggleDean

- Hampshire

Question

Is this compatible with the original Hollowtech chainsets?

asked 2 years ago

Clinton

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

Yes, as long as you order the correct PCD size and the speed is compatible e.g. 8 and 9 speed.

answered 2 years ago

WiggleDean

- Hampshire

Question

How do I measure chainring ring PCD?

I need to replace the middle chain ring on my MTB. Existing setup is Shimano XT. I think I've found what I need on your site, but just want to double check how to measure PCD. Is it taken from the inside diameter or outside? The Shimano 104 PCD Deore M510 4 Arm Middle Chainring looks like what I need, but 104mm on my chainring is the BCD.

Cheers

Paul

Products related to my question

104 PCD Deore M510 4 Arm Middle Chainring

(50)

asked 1 year, 10 months ago

Anonymous

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

Measure between two closest bolt holes then on a 4 bolt ring multiply the figure by 1.4, on a 5 bolt ring multiply the figure by 1.7. You then get the PCD/BCD of the ring. BCD and PCD are the same thing.

answered 1 year, 10 months ago

WiggleDean

- Hampshire

Question

I have a Shimano Deore Chainset Hollowtech II M542, Just wondering if this middle chainring will fit also can you use a Cn 7701 chain with it ?

Country: Australia

Products related to my question

104 PCD Deore M510 4 Arm Middle Chainring

(50)

asked 1 year, 10 months ago

aforestfan

- Central Coast

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

You should be fine with this chainring on a M542 chainset. The chain will work but generally you will get a better performance from a cheaper 9 speed chain on 9 speed rings, 10 speed chains will work though.

answered 1 year, 10 months ago

WiggleDean

- Hampshire

Question

I need a middle chainring for Scott sub 10 (2008)?.

It has 4 bolts, 36 teeth and is approx 110 mm in diameter (measureded on inner circle, not to teeth)

The marking on current one are:
Shimano SG-X M9-U36 FF

Please recommend a replacment? thanks

Country: Australia

asked 1 year, 9 months ago

Anonymous

- Sydney

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

You should be fine with the chainring listed below.

Products from my answer

104 PCD Deore M510 4 Arm Middle Chainring

(50)

answered 1 year, 9 months ago

WiggleDean

- Hampshire

Question

Is this Middle Chainring Compatible with a FC MC 20 ?

Can you confirm if this chainring can be used to replace a damaged 32T middle chainring from a Shimano FC MC 20 ?

asked 1 year, 6 months ago

Ruskaz

on 104 PCD Deore M510 4 Arm Middle Chainring

1 answer

Answers

answer 1

yes you should be fine to use this chainring as a replacement part.

answered 1 year, 6 months ago

WiggleDean

- Hampshire

1 2 next>>

Looking for Answers about this Product?

Customer Questions & Answers for Shimano 104 PCD Deore M510 4 Arm Middle Chainring

Questions & Answers for Shimano 104 PCD Deore M510 4 Arm Middle Chainring

Customer Questions & Answers for
Shimano 104 PCD Deore M510 4 Arm Middle Chainring