It would depend on the make of computer. I would think you could only order the same as originally provided. Have you thought about a wireless computer?

I had the same problem with the wired version on a MTB. I packed it out with a piece of black rubber, it works well and looks fine.

Any bike computer will do the trick providing you can fit the magnet, mounting kit and sensor on the bike in question. If the bike has the usual dimension forks, handle bars and spokes you will have no problems. When I say dimensions I do not mean to the mm, merely trying to convey that if your bike fits the common form of the average bike you will have no problems.

We do indeed, you can order it at the link below.

http://www.wiggle.co.uk/p/cycle/7/Cateye_Adventure_Wireless_Cycling_Computer/5360051271/

Many of our computers have a Cadence option. I would advise setting a budget and then check computers at the higher end of your budget for those that list the cadence feature. All cadence computers list this as a fuction.

Most cycle computers have presets so you can't set the wheel size to 10 inches. Some computers allow you to measure the wheel and input this measurement manually but this feature is not listed by the manufacturers unfortunately so I can't suggest one to you.

I am sorry but we do not stock this range of computers. You need to ask the shop you purchased the computer from or a Union dealer.

You need a rear wheel mounting kit to work on a trainer. I will link some below.

The sensors are held on with cable ties so you should be fine.

The flightdeck computer heads unit we stock will work but you will need a compatible fitting kit which we do not currently stock at this time.