I have removed the old BB, and it is an RPM BB-7420 with BC 1.37x24T lettering. There is a "68" stamp on the main body and "B-113" on the spindle, which I guess makes it a 68x113. I believe that the Shimano UN54 68x113 is the compatible BB - is that correct?

Country: United Kingdom

asked 2 years ago

AlanForsyth

- Fife

on Bottom Brackets

2 answers

Answers

answer 1

There are others you could use but yes, use that one.

answered 2 years ago

MartinCroxall

- Loughborough

answer 2

Sounds bang on. If you're in any doubt just measure the body and the spindle.

answered 2 years ago

RipVan

- Scotland

Question

Do you sell shimano un72 bb

I am trying to upgrade my old raleigh grand prix (1977) to run on a triple ring sugino AT crankset and need a bottom bracket set that will clear the chainstay. I think that the shimano un &@ (68x127.5+2mmspacer) may be my best overall option to solve the problem. I have read on a couple bike forums that you sell these old shimano sealed BBs.

asked 2 years, 1 month ago

Charlies

- oakland, california, usa

on Bottom Brackets

1 answer

Answers

answer 1

We do not stock the UN72 but we do stock the UN54 model here: http://www.wiggle.co.uk/p/cycle/7/Shimano_UN54_Tapered_Bottom_Bracket/5360027179/

This is available in BS 127mm.

answered 2 years, 1 month ago

WiggleDean

- Hampshire

Question

What type of bottom bracket will fit a Kona King 1996?

asked 2 years, 1 month ago

Anonymous

on Bottom Brackets

1 answer

Answers

answer 1

Unfortunately I can't find the specifications for the 1996 Kona King. I recommend contacting Kona directly who should be able to help you with the size you need.

answered 2 years ago

WiggleDean

- Hampshire

Question

correct bb for 2006 trek 6000 disk

asked 2 years ago

gasinayr

on Bottom Brackets

1 answer

Answers

answer 1

Unfortunately we have not stocked Trek bikes before, you should contact a Trek dealer or Trek directly who should be able to offer the correct bottom bracket.

answered 1 year, 11 months ago

WiggleDean

- Hampshire

Question

Hi can you tell me if the race face signature isis bottom bracket will be a suitable replacement for an fsa alphadrive on a Giant Trance x3 2008?thank

asked 2 years ago

twintub

on Bottom Brackets

1 answer

Answers

answer 1

If your chainset uses a ISIS connection you should be fine with the Signature bottom bracket. I think that the Trance X3 2008 uses a Powerdrive connection though which we do not stock a replacement for, be sure which one you need before purchasing.

answered 1 year, 11 months ago

WiggleDean

- Hampshire

Question

Replacement - bearings for stainless steel road Hope bottom Bracket.

Does wiggle sell replacement bearings for Hope Bottom Bracket stainless steel bearings?

asked 1 year, 11 months ago

Warmsunset62

- Horley - Surrey - United Kingdom

on Bottom Brackets

1 answer

Answers

answer 1

Unfortunately we do not stock the replacement bearings for Hope bottom brackets.

answered 1 year, 11 months ago

WiggleDean

- Hampshire

Question

Do you offer any alternative BB bearings for the Shimano BB-ES25 Octolink cartridge bearing 68 x 118mm?

I need to replace the existing BB bearing due to wear.

asked 1 year, 11 months ago

Anonymous

on Bottom Brackets

1 answer

Answers

answer 1

Unfortunately we do not stock replacement bearings for these bottom brackets.

answered 1 year, 11 months ago

WiggleDean

- Hampshire

Question

Power Pro 7420 116mm replacement needed

Can you suggest what will suit?

asked 1 year, 10 months ago

Anonymous

on Bottom Brackets

1 answer

Answers

answer 1

We don't stock a Square Tapered bottom bracket in 116mm but we do stock the UN54 in 115mm and 118mm. The 115mm should be fine, I will link it below for you.

Products from my answer

UN54 Tapered Bottom Bracket

(54)

answered 1 year, 10 months ago

WiggleDean

- Hampshire

Question

have ulteagra double chainrings which bottom bracket do i need

Country: France

asked 1 year, 8 months ago

ponsman

- Pons

on Bottom Brackets

1 answer

Answers

answer 1

If you have a bottom bracket with a axle that is attached to the chainset, you will need hollowtech II external bottom bracket cups as linked below. Otherwise you will likely need a square taper bottom bracket such as the UN54 as linked below. There are other mounting methods, you may need to e-mail a picture to us at sales@wiggle.co.uk so we can identify it for you.

Products from my answer